Click on the image to check the artwork
Product Name: Carbide Rod Blanks
Grade: KU409/KU10/KU209/KU30/KU20/KR10Z/KU25
Diameter: 0.7mm~50mm
Length: 330mm/310mm
Surface: h6 polished tolerance or unground
Specifications
Features
1. Long life span.
2. Manufacture with advanced automatic extrusion equipment.
3. HIP sintering and precision grinding to ensure the good performance.
4. Blank and finished tungsten carbide rods for your choice.
5. Reach a mirror-effect surface after accurate grinding and polishing.
Applications
For making the drill bits, end-mills, reamers
FAQ
Q: What are carbide rods used for?
A: The main application of the carbide rods is for making cutting tools. Such as drills, automotive cutting tools, printed circuit board cutting tools, engine cutting tools, integral end mills, dental burs, integral reamers, engraving knives, etc.
Definition of Physical Properties
Magnetic Saturation:
Magnetic Saturation is the ratio of magnetic intensity to quality. Magnetic Saturation measurements on the Cobalt binder phase in cemented carbide are used by the industry to evaluate its composition. Low Magnetic Saturation values indicate a low carbon level and/or the presence of Eta-Phase Carbides. High Magnetic Saturation values indicate the presence of “free-carbon” or Graphite.
http://www.kunruicarbide.com/